Volka MakinaCTP
Esc
↑↓ navigateEnter openEsc close

Braking & Steering 695 parts

Friction discs, brake linings, clutch discs and caliper service groups: wear parts for stopping and steering systems.

695 parts · page 1 / 29

Active filters:Braking & SteeringClear all
ImagePart no.Name and categoryStatusList priceQtyAdd
Actuator Group3V7028Actuator GroupBraking & Steering
Actuator Group5T0925Actuator GroupBraking & Steering
Actuator Kit4E5986Actuator KitBraking & Steering
Master Cylinder Rebuild Kit3D9334Master Cylinder Rebuild KitBraking & Steering
Compressor1647566CompressorBraking & Steering
6W42806W4280ActuatorBraking & Steering
8R24888R2488Actuator GroupBraking & Steering
8W83578W8357ActuatorBraking & Steering
8W83588W8358ActuatorBraking & Steering
9V86939V8693ActuatorBraking & Steering
9V87369V8736ActuatorBraking & Steering
3D22193D2219Brake Cylinder AssemblyBraking & Steering
4K59684K5968Brake Cylinder GroupBraking & Steering
5T65205T6520Cylinder AssemblyBraking & Steering
5T65335T6533Wheel Cylinder KitBraking & Steering
5T66055T6605Cylinder KitBraking & Steering
5T66175T6617Cylinder AssemblyBraking & Steering
5T66185T6618Cylinder AssemblyBraking & Steering
9C01669C0166Air Cylinder GroupBraking & Steering
9K15919K1591Master CylinderBraking & Steering
6Y19356Y1935Brake Band LiningBraking & Steering
6Y19376Y1937Brake Band LiningBraking & Steering
6Y19486Y1948Brake LiningBraking & Steering
6Y23566Y2356Brake Band LiningBraking & Steering

Brake and steering parts

On construction machines, braking and steering usually rely on oil-cooled multi-disc packs or band systems. This category includes friction discs, steel discs and plates, brake band linings, clutch discs, hydraulic caliper brake service groups and related valves.

  • Friction and steel discs: stack together to provide holding force
  • Brake band lining: the friction surface in band-type systems
  • Caliper service groups: used when repairing hydraulic brakes

These products come from CTP, which makes OEM-quality parts for Caterpillar and Komatsu machines. Volka Makina is the authorized regional distributor of CTP.

Selection and safety

Disc outside diameter, tooth count and thickness vary by model, so the part number, or machine model and serial number, is essential. Search with the Part finder; to check discs, plates and seals together, Paste a parts list helps.

Brakes are safety-critical: replace discs that reach their wear limit without delay and renew them as a set. In oil-immersed discs, oil quality and cleanliness directly affect life, and after replacement the brake should be tested in safe conditions.

Frequently asked questions

When should brake discs be replaced?

When they reach the wear limit specified by the manufacturer or braking weakens. Decide by measuring thickness.

Can I replace discs individually?

This is not recommended; renewing the pack gives even load distribution and smooth braking.

What should I do after a brake repair?

Bleed the system, check oil level and test the machine in a safe area.

Popular Braking & Steering parts: full list

We also source parts that are not listed here

Send the part number or machine model; we will match it and quote within 24 hours.